Aquastop SHT 262 water detector with sensor cable
Item no.: 300262
The Aquastop SHT 262 with sensor line is a protection system with appliance shutdown. The electronic alarm and switch-off device detects the smallest amounts of liquid and switches off the connected appliance. This activates the appliance's water stop. With acoustic and visual warning.
Possible applications
- In the event of water ingress, the unit switches off
- Protection against leakage for appliances with water consumption
- (e.g. washing machine and dishwasher)
- Connection of a normally closed solenoid shut-off valve
WWD 450 Smart water detector with sensor cable 230 VAC/50Hz/grounded plug
Item no.: 500450
No matter where ...
Whether kitchen cabinets, laundry rooms, bathroom furniture or the aquarium in the living room:
the WWD 450 detects water leaks anywhere with its sensor line and alerts you before more serious damage occurs.
The 2 meter long sensor cable (can be extended on request) reacts sensitively to individual drops of water along its entire length. The mechanically strong cable, resistant to corrosion and abrasion, consists of two sensor wires embedded in a fluoropolymer carrier rod. Thanks to the robust cable construction with conductive polymer technology and fluoropolymer construction detection, no metal is exposed. For cleaning, you can wipe it with a clean damp cloth.
Once you have added the device to the Smart Live app, it sends a push notification to your smart phone in the event of an incident - and by text message if you wish.
Possible applications
- Water ingress
- 100% made in Germany
- for laying under kitchen and bathroom furniture
- under aquariums
- under other devices, where water can leak over a wide area
- under pipes, tubs, tanks ...
- for indoor projects such as data centers / control rooms / HVAC / IOT
- Cistern monitoring
- Level monitoring
WWD 241 Smart water detector Mini float 230 VAC/50Hz/Shocko plug
Item no.: 500241
The water detector for simple and quick installation!
The WWD 241 socket outlet water detector functions as a purely acoustic detector. If a certain water level is detected with the mini float switch, a loud acoustic alarm sounds and the LED flashes red. When the water falls below the specified level, the device automatically stops and the LED lights up green again.
Possible applications / special features:
- Particularly suitable for dirty water or other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oil, etc.)
WWD 240 Smart water detector 230 VAC/50Hz/grounded plug
Item no.: 500240
The WWD 240 socket outlet water detector functions as a purely acoustic detector. If ground moisture is detected by the sensor, a loud acoustic alarm sounds and the LED flashes red. After you have added the device to the Smart Live app, it sends a push notification to your smartphone in the event of an incident. Once the sensor has dried out, the device automatically stops and the LED lights up green again.
Possible applications
- Water ingress
GAS ALARM GX-D3
Item no.: 300233
Gas sensor GX-H2
Item no.: 200616
CO2 traffic light "school
Item no.: 400250
The CO2 traffic light "school" with internal NDIR sensor is an indicator of the carbon dioxide content in the room air and provides a visual warning of increasingly poor air quality in indoor areas where many people frequently spend time and encourages regular draught ventilation.
The device is not approved for any other use than described above.
Water sensor SHT 5090
Item no.: 300721
Prof. CO2 warning device for carbon dioxide GX-D500
Item no.: 300267
Possible applications
- for dispensing systems with carbon dioxide (CO2 carbon dioxide)
- according to DIN 6653-2
- Small to medium-sized breweries, wine and fermentation cellars
- Gastronomy with beverage dispensing equipment
- Dry ice storage and processing
- all plants with CO2 from pressure cylinders
CO2 traffic light OFFICE
Item no.: 400380
In the hectic office routine, it is often noticed too late - many different factors cause the proverbial "thick air".
Our oxygen supply continuously decreases and we become flabby and tired. Fresh air means more oxygen - thus more well-being and more performance.
The CO2 traffic light "office" helps you to ventilate in time, to ventilate for a sufficiently long time and thus to ventilate in a sensible energy-saving way. This way you feel fit again faster - and that is logically also healthier.
Possible applications
- Room air monitoring in the office according to EU standard EN 13779
- Individual office, reception offices, open plan office, meeting rooms and more.
- reliable reminder to ventilate regularly
BBB 300 Potential-free contact | Light control
Item no.: 200603
The BBB300 add-on module turns a switched socket (e.g. KDS 210 and FDS 200 exhaust air controls) into a potential-free contact that can be loaded with up to 5 amps. Ideal for using the control contacts of newer exhaust systems with existing socket exhaust control, but also to switch off only the motor and leave the lighting untouched. The switching behavior is: socket switched on = contact closed.
SHT 450 socket water detector with sensor cable
Item no.: 300450
No matter where ...
whether kitchen base cabinets, laundry rooms, bathroom furniture or the aquarium in the living room:
the SHT 450 detects water leaks everywhere with its sensor line and alerts you before worse damage occurs.
The 2 meter long sensor cable (extendable on request), reacts sensitively to single drops of water along its entire length. The mechanically strong cable, resistant to corrosion and abrasion, consists of two sensor wires embedded in a fluoropolymer carrier rod. Due to the robust cable construction with conductive polymer technology and fluoropolymer construction detection, no metal is exposed. For cleaning, you can wipe it with a clean damp cloth.
For connection to the Schabus water detectors is suitable only a LiYY control line with 2x 0.14mm², which can be ordered separately.
Possible applications
- Water ingress
- 100% made in Germany
- for laying under kitchen and bathroom furniture
- under aquariums
- under other devices, where water can leak over a wide area
- under pipes, tubs, tanks ...
- for indoor projects such as data centers / control rooms / HVAC / IOT
- Cistern monitoring
- Level monitoring
Radio exhaust air control FDS 200 DIBt
Item no.: 300462
Possible applications
The transmitter of the FDS 200 set with DIBt approval monitors the window position and transmits the information by radio to an intermediate plug receiver with a switched 5 A socket. In this way, an exhaust air system can only be operated with a tilted or open window if it is ensured that sufficient fresh air flows into the room and thus no negative pressure is created that could draw dangerous and toxic carbon monoxide from a combustion site.
Gas sensor GX-LNG
Item no.: 300897
Gas Alarm GX-HS
Item no.: 400200
Radio exhaust air control FDS 100 DIBt
Item no.: 300268
The transmitter of the FDS 100 set with DIBt approval monitors the window position and transmits the information by radio to a built-in receiver with a potential-free 5 A changeover relay. In this way, an exhaust air system can only be operated with a tilted or open window if it is ensured that sufficient fresh air flows into the room and thus no negative pressure is created that could draw dangerous and toxic carbon monoxide from a combustion site.
WWD 150 Wireless Water Detector float switch
Item no.: 200150
WWD 100 Wireless Water Detector
Item no.: 200100
WWD 200 Smart Home Adapter
Item no.: 200200
Extension cable Schuko 3×2,5mm 30m
Item no.: 300230
Extension cable Schuko 3×2,5mm 20m
Item no.: 300220
Extension cable Schuko 3×2,5mm 10m
Item no.: 300210
Extension cable Schuko 3×1,5mm 50m
Item no.: 300150
Extension cable Schuko 3×1,5mm 40m
Item no.: 300140
Extension cable Schuko 3×1,5mm 30m
Item no.: 300130
Extension cable Schuko 3×1,5mm 20m
Item no.: 300120
Mini float switch V4A changeover contact
Item no.: 300939
Stainless steel mini float switch for our water detectors SHT 5000, SHT 5001 and SHT 5002 with reed contact (25 V AC / 60 V DC / max. 0.5 A / max. 10 W) for food, water and many other liquid media from 0.7 g / cm³, to which stainless steel is resistant. Encapsulated with a 2.5 metre long LiYY cable.
Mini float switch V4A normally open contact
Item no.: 300941
Stainless steel mini float switch for our water detectors SHT 5000, SHT 5001 and SHT 5002 with reed contact (25 V AC / 60 V DC / max. 0.5 A / max. 10 W) for food, water and many other liquid media from 0.7 g / cm³, to which stainless steel is resistant. Encapsulated with a 2.5 metre long LiYY cable.
Mini float switch V2A changeover contact
Item no.: 200939
Mini float switch plastic changeover contact
Item no.: 200938
Exhaust gas temperature monitor ATW 519 50°C
Item no.: 201759
The Cetrotec exhaust gas temperature monitor type 519 with 50°C switching point is type-tested by TÜV, approved for use in heat generating plants and is mounted with a flange on a free piece of stove pipe with a minimum diameter of 120 mm. Its normally closed contact can switch power, its normally open contact is only intended for control tasks, so it is technically suitable for bridging an exhaust air control when the furnace is cold or is used slightly modified as a control device for our cable exhaust air controls.
Hint: Involve your chimney sweep in your planning before installation so that nothing stands in the way of acceptance afterwards. There are significant regional differences over which Elektrotechnik Schabus has no influence.
Possible applications
- Bivalent operation with gas or oil heating to lock it when the solid fuel boiler is in operation
- Monitoring tasks to switch off the exhaust air system in rooms with open or closed fireplaces to prevent exhaust gases from being sucked back into the rooms when the fireplace is burning.
- Other monitoring and control tasks such as controlling the storage tank charging pump
- Indicator lamp for fuel boiler burnout
Supply air damper electric ⌀ 200 mm
Item no.: 201752
The electric supply air damper with a diameter of 200 mm and a fast spring return motor opens within 8 seconds when the operating voltage is applied and closes, also braked by the spring gear, in about 8 seconds when the operating voltage is removed. Such a damper is controlled, for example, by the KZS 200 (301745) supply air control unit, which automatically opens the damper when the exhaust air motor is switched on.
Possible applications
- Supply air control for extractor bonnet
- For controlling the air flow in ventilation and air-conditioning systems
Supply air damper electric ⌀ 150 mm
Item no.: 201755
The electric supply air damper with a diameter of 150 mm and a fast spring return motor opens within 8 seconds when the operating voltage is applied and closes, also braked by the spring gear, in about 8 seconds when the operating voltage is removed. Such a damper is controlled, for example, by the KZS 200 (301745) supply air control unit, which automatically opens the damper when the exhaust air motor is switched on.
Possible applications
- Supply air control for extractor bonnet
- For controlling the air flow in ventilation and air-conditioning systems
Rosette - ⌀ 130 mm silver gray - Accessories DS01
Item no.: 21010
Rosette - ⌀ 130 mm black - Accessories DS01
Item no.: 21009
Rosette - ⌀ 150 mm black - Accessories DS01
Item no.: 21011
airtight supply air damper ⌀ 200 mm
Item no.: 201761
The airtight electric supply air damper with a diameter of 150 mm and a high-torque condenser motor opens and closes each time within 150 seconds during open-close control or via 2-way control. The relatively long time is due to the slow-running motor, which has to press the EPDM sealing lip against the galvanized steel pipe with a lot of force. Such a damper is controlled, for example, by the KZS 200 supply air control, which automatically opens the damper when the exhaust air motor is switched on.
Possible applications
- Supply air control for incinerators
- For controlling the air flow in ventilation and air-conditioning systems
- Diameter: 200 mm
airtight supply air damper ⌀ 150 mm
Item no.: 201760
The airtight electric supply air damper with a diameter of 150 mm and a high-torque condenser motor opens and closes each time within 150 seconds during open-close control or via 2-way control. The relatively long time is due to the slow-running motor, which has to press the EPDM sealing lip against the galvanized steel pipe with a lot of force. Such a damper is controlled, for example, by the KZS 200 supply air control, which automatically opens the damper when the exhaust air motor is switched on.
Possible applications
- Supply air control for incinerators
- For controlling the air flow in ventilation and air-conditioning systems
- Diameter: 150 mm
Starting current limiter ASB 120 3500W/16A
Item no.: 300118
The ASB 120 starting current limiter limits the current of a machine starting in no-load operation the machine connection power for about 700 milliseconds immediately after it is switched on and then switches the current fully through in order to effectively prevent the house circuit breaker on the public power supply system from tripping during the time phase in which the magnetic field of the coils of an electric motor has not yet been established.
Water detector SHT 5000
Item no.: 300744
SHT 5000 - 230 V - the all-rounder among water detectors - now optimized for the WWD 200 smart home adapterwhich sends push notifications to your smartphone via the Smart Live app.
Areas of application
- Water ingress / water pipe burst
- Pump control
- Cistern monitoring
- Level monitoring
- Overflow message (e.g. drainage shaft)
- Monitoring flat roofs
- Combined with mini float switch also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.)
- Automatic bilge pumps (SHT5000-24 V for boats)
- for water sports, hobby brewers, aquariums, model making, swimming pools, bathrooms and kitchens, workshops, etc.
- IP 65 on request
EFM PSU 300 Power Supply Wireless and DMX
Item no.: 400208
EFM PSU 200 Power Supply Wireless and DMX
Item no.: 400207
EPO retrofit kit set PAN / TILT / Focus / PO module
Item no.: 400710
EPO retrofit kit PAN / TILT / PO module
Item no.: 400700
EMY motoryoke SET PSU 300 Focus
Item no.: 400611
EMY motoryoke SET PSU 200
Item no.: 400600
USB calibration adapter
Item no.: 200340
CO detector 40 ppm
Item no.: 7639852
CO detector according to DIN EN 50291
Item no.: 7549937
RAL painting for CO2 traffic light
Item no.: 09.67945.0
Emergency power supply for GD-04K
Item no.: 200579
Silicone hose
Item no.: 21002
Active water sensor SHT 8824
Item no.: 200324
Folding float switch 230 volt
Item no.: 300949
GX-K2 Gas alarm with external sensor
Item no.: 300932
The warning device warns of the toxic vapors that could escape from leaking refrigeration and cooling systems and primarily serves to protect people who should not inhale these vapors. The HFC ALARM GX-K1 with internal sensor or GX-K2 with external sensor already warns at concentrations far below a life-threatening level. This monitoring system is therefore set very sensitive according to its purpose.
The GX-K1 or GX-K2 is plugged into the sockets, with the GX-K2 the sensor is positioned appropriately and then the HFC warning device is ready for operation after 3 minutes preheating time and warns early in case of leakage at the cooling system with a loud alarm tone and red flashing LED. The device is suitable for normal household use and must not be used in potentially explosive atmospheres.
The warning device is ready for operation after 3 minutes of preheating time and gives early warning of leaks in the cooling system with a loud alarm tone and red flashing LED.
Possible applications
- Heat pumps
- Air conditioners
- Coolant and refrigerant
- Hydrofluorocarbon
GX-K1 Gas alarm with internal sensor
Item no.: 300931
The warning device warns of the toxic vapors that could escape from leaking refrigeration and cooling systems and primarily serves to protect people who should not inhale these vapors. The HFC ALARM GX-K1 with internal sensor or GX-K2 with external sensor already warns at concentrations far below a life-threatening level. This monitoring system is therefore set very sensitive according to its purpose.
The GX-K1 or GX-K2 is plugged into the sockets, with the GX-K2 the sensor is positioned appropriately and then the HFC warning device is ready for operation after 3 minutes preheating time and warns early in case of leakage at the cooling system with a loud alarm tone and red flashing LED. The device is suitable for normal household use and must not be used in potentially explosive atmospheres.
The warning device is ready for operation after 3 minutes of preheating time and gives early warning of leaks in the cooling system with a loud alarm tone and red flashing LED.
Possible applications
- Heat pumps
- Air conditioners
- Coolant and refrigerant
- Hydrofluorocarbon
PROF. CO ALARM GX-C330
Item no.: 300330
The CO ALARM GX-C330 is a carbon monoxide warning device for monitoring indoor areas with open combustion and is equipped with an integrated electro-chemical sensor. An LCD display constantly informs about the operating status as well as the exact measured ppm number of the CO concentration in the ambient air.Possible applications
Possible applications
- Shisha bars and smoking clubs
- Monitoring the proper functioning of ventilation systems
- Laboratory environments in universities, schools and companies
- Occupational safety measures for open burns in the catering industry
- Storage of CO in pressure cylinders
GAS ALARM SET GX-A1+CO
Item no.: 300266
We have designed the GX-A1+CO set in such a way that it is possible to equip a professional carbon monoxide warning device with an external sensor, e.g. to position the warning device in front of the room to be monitored and the sensor in the room to be monitored in order to see from the outside whether the room is safe to enter.
The carbon monoxide concentration is evaluated and displayed with ppm accuracy. In the event of an alarm, a potential-free changeover relay switches and another relay switches in the event of technical faults detected by the warning device itself, such as a cable break or sensor failure, in order to inform the building control system.
Possible applications
- Carbon monoxide CO from incomplete combustion
- open fireplace, gas stoves, Swedish stoves
- Open fire, barbecue facilities, pellet bunker
Water detector SHT 5001
Item no.: 400748
The SHT 5001 water detector for top-hat rail mounting in the fuse box or small distribution board has 2 independent detection lines, which are designed identically with the option of connecting sensors or mini float switches to their own inputs in each case, activating the alarm memory via wire jumper or switching a potential-free changeover relay when "water" is detected. Test, reset, internal alarm beeper, or the connection of external alarm indicators with 12 volts to 30 mA, on the other hand, are carried out together for both detection lines. The cable lengths can be extended for sensors up to 100 meters, for mini-float switches up to 300 meters per signal line, provided that only thin and unshielded 2x0.14mm² LiYY cables are used, which are not laid parallel to lines of the mains AC voltage.
GX-D500P
Item no.: 300263
Possible applications
- Dry ice processing/storage
- Beverage dispensing systems and greenhouses
- Meat and sausage cooling
- according to DIN 6653-2
- Automatic forced ventilation
- Rooms with very hot, cold, humid or dusty air or in ventilation systems with draughts
[vc_row][vc_column][vc_text_separator title=”Lieferprogramm Elektrotechnik SCHABUS” align=”align_left” color=”custom” accent_color=”#c20012″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Elektrotechnik Schabus ist Entwickler und Hersteller der hochwertigen Warnsysteme und sicherheitstechnischen (Funk-) Lösungen. Diese Lösungen entwickeln wir durch unsere Nähe am Markt Geschehen und am Kunden. Nur so wissen wir, was die Endverbraucher suchen und brauchen. Zusätzlich entwickeln wir elektronische und elektromechanische Spezialanfertigungen für Unternehmen unterschiedlichster Branchen. Mit Elektrotechnik Schabus haben Sie einen erfahrenen Partner zur Seite, der Sie von der Entwicklung bis hin zur Fertigung und Montage bei Ihrem Projekt kompetent begleitet. Sie haben die Idee – wir setzen die Lösung um![/vc_column_text][/vc_column][/vc_row]