Home " Delivery program

1-72 of 208 results are displayed

CO2 traffic light "customized

Item no.: 400370
358,02 
Reminds of regular draught ventilation in case of stale air
Possible applications
  • Monitoring of all dry indoor spaces where there are often / many people, e.g. gastronomy, etc.
  • Reliable reminder for regular draught ventilation

Radio magnetic switch FDS 098

Item no.: 300098
79,90 
Additional transmitter for FDS 100/200/216, FKS 100/200

CO2 traffic light - stand

Item no.: 400110
29,00 
Stand is the ideal complement for CO2 traffic lights Application area:
  • if wall mounting is not possible or desired
  • Mounting on horizontal surfaces
 

Water sensor SHT 5008 for floor mounting

Item no.: 300719
39,00 
The water sensor SHT 5008 with three contacts is suitable for floor mounting on hard floors such as screed, concrete, but also plastic (GRP) or tarred floors. With its 3-wire cable, the redundancy function or the differentiation between standing and rising water can be realized with the water detector SHT 5001, but by combining two cables, the SHT 5008 can also be easily operated on any other Schabus water detector as a floor sensor in a more stable design.

Water sensor SHT 5006

Item no.: 300745
25,00 
Accessories for water detector The standard SHT 5006 water sensor with 2 nickel-plated brass contacts and 6 meters of cable is overmolded with a soft, water-repellent plastic and has a gap between the contacts to prevent any biofilms that may form from triggering false alarms. The SHT 5006 sensor for connection to all Schabus water detectors is only suitable for regularly dry environments, ideal for detecting creeping moisture on floors and surfaces, but rather unsuitable for detecting water levels in shafts, tanks and other containers with regularly damp environments.

Water detector SHT 5000 12-24V

Item no.: 300790
129,00 
SHT 5000 | 12-24 V - the all-rounder among water detectors - now optimized for the WWD 200 smart home adapterwhich sends push notifications to your smartphone via the Smart Live app.
Areas of application
  • Water ingress / water pipe burst
  • Pump control
  • Cistern monitoring
  • Level monitoring
  • Overflow message (e.g. drainage shaft)
  • Monitoring flat roofs
  • Combined with mini float switch also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.)
  • Automatic bilge pumps (SHT 5000-24 V for boats)
  • for water sports, hobby brewers, aquariums, model making, swimming pools, bathrooms and kitchens, workshops, etc.
  • IP 65 on request

Control cable LIYY meter goods

Item no.: 300780
3,90 
Possible applications
  • Flexible cable LIYY (2 x 0.14 mm²)
  • Diameter 3.0 mm
  • Yard goods - determine the total length via the number of pieces

Comfort package FDS 100 / FTX 519

Item no.: 300539
319,00 
This comfort package without DIBt approval includes a classic radio exhaust control set FDS 100 consisting of a window switch with built-in receiver and a radio exhaust temperature monitor FTX with remote transmitter for shorter or covered, but always freely accessible stovepipes. This means that for very rarely used stoves, a window does not always have to be opened every time the exhaust air system is used.
Hint: Involve your chimney sweep in your planning before installation so that nothing stands in the way of acceptance afterwards. There are significant regional differences, on which Elektrotechnik Schabus has no influence.

Cable exhaust control KDS 110 DIBt

Item no.: 300740
99,00 
The magnetic switch of the KDS 110 set with DIBt approval monitors the window position and transmits the information via a thin cable to a built-in control unit with a potential-free 5 A change-over relay. In this way, an exhaust air system can only be operated with a tilted or open window if it is ensured that sufficient fresh air flows into the room and thus no negative pressure is created that could draw dangerous and toxic carbon monoxide from a combustion site. Depending on the connection option (e.g. Miele PUR 98), the light of the bonnet can also be switched on independently of the window position.

Mini float switch plastic normally open contact

Item no.: 200940
35,00 
Standard mini float switch made of plastic for our water detectors SHT 5000, SHT 5001 and SHT 5002 with reed contact (25 V AC / 60 V DC / max. 0.5 A / max. 10 W) for all types of water and liquid media from 0.7 g / cm³, encapsulated with 2.5 metre long LiYY cable. Possible applications
  • Accessories for SCHABUS water detectors SHT 5000 and 5001, 5002
 

Flue gas temperature monitor ATW 519 - KDS 110/116

Item no.: 201753
138,99 
The Cetrotec flue gas temperature monitor type 519 with 40°C switching point and 10-k resistor is approved for use in heat generating plants and is mounted with a flange on a free piece of furnace pipe with a minimum diameter of 120 mm. Its normally open contact is only intended for control tasks and has been bridged by us with a 10 kOhm cable breakage protection resistor, therefore this version of the temperature monitor is only suitable as an optional accessory for our KDS cable exhaust air controls in order to enable an exhaust air system when the stove is cold without having to open a window each time as well, provided that the approval of the master chimney sweep is available, since an exhaust air control in combination with an exhaust gas temperature monitor does not have DIBt approval.

Mini float switch V2A normally open contact

Item no.: 200941
49,90 
Stainless steel mini float switch for our water detectors SHT 5000, SHT 5001 and SHT 5002 with reed contact (25 V AC / 60 V DC / max. 0.5 A / max. 10 W) for food, water and many other liquid media from 0.7 g / cm³, to which stainless steel is resistant. Encapsulated with a 2.5 metre long LiYY cable.

Mounting bracket f. mini float switch

Item no.: 300787
9,89 
Accessories for mini float switch Inexpensive and compact mounting bracket made of V2A for mounting Schabus mini-float switches on vertical walls. Due to the open fork of the angle, the cable does not have to be cut open.

Relay plug-in card accessories SHT 5000

Item no.: 300747
39,90 
The optionally available relay plug-in card for the SHT 5000 assigns each of the 4 detection lines, in addition to the main relay, its own small changeover relay, which is polled by the WWD 200 smart home adapter. In contrast to the main relay, the 4 small relays of the relay plug-in card are not energized in monitoring mode and only pick up when the assigned detection line is activated by the water. The relay plug-in card has no influence on the various setting options of the SHT 5000 and can be retrofitted at any time.

Radio exhaust air control FDS 100 DIBt

Item no.: 300268
155,00 
The transmitter of the FDS 100 set with DIBt approval monitors the window position and transmits the information by radio to a built-in receiver with a potential-free 5 A changeover relay. In this way, an exhaust air system can only be operated with a tilted or open window if it is ensured that sufficient fresh air flows into the room and thus no negative pressure is created that could draw dangerous and toxic carbon monoxide from a combustion site.

Radio exhaust air control FGS 170

Item no.: 300714
173,00 
The FGS 170 radio gas heater control system consists of a 230-volt transmitter, which interrogates the potential-free contact of a gas heater, and a 230-volt receiver, which converts the change of state of the gas heater into a changeover of the potential-free changeover relay. With this system, a bathroom fan, for example, can be switched off when the gas heater is ignited.

Comfort package FTW 519 with FDS 100 set

Item no.: 300519
319,00 
This comfort package without DIBt approval includes a classic FDS 100 exhaust air control set consisting of a radio window switch with intermediate plug receiver and an FTW exhaust gas temperature monitor with integrated transmitter for long, completely free (not jacketed) stove pipes at a minimum height of 80 cm (measured from the top of the stove). This means that for very infrequently used furnaces, a window does not always have to be opened every time the exhaust air system is used.
Hint: Involve your chimney sweep in your planning before ordering so that nothing stands in the way of acceptance afterwards. There are significant regional differences over which Elektrotechnik Schabus has no influence.

GAS ALARM GX-B2pro

Item no.: 300926
119,00 
The socket gas warning device with external sensor for town gas and natural gas is plugged into a socket and the sensor is set to an upper (natural gas / methane) or lower (liquid gas / butane, propane) position depending on the gas. The warning device is ready for operation after 3 minutes of preheating time and warns already far below dangerous gas concentrations with a loud alarm tone and red flashing LED. Possible applications
  • Monitoring of gas heating or gas cooker / detection of town, natural and liquid gases
  • Monitoring of the heating and utility rooms
  • Storage of liquid gas cylinders or camping gas
  • Air conditioners / coolants
 

Radio magnetic switch FDS 098 L

Item no.: 300198
79,00 
Additional transmitter for a second window can be combined with the FDS 100, FDS 200 and FDS 216 devices. At least one window must be open for the exhaust air system to be switched on. The serial number can be found on the type plate of the radio receiver or transmitter under the barcode field. Longlife additional transmitter for FDS 100/200/216

Radio receiver FDS 199

Item no.: 300601
82,00 
Additional receiver for the exhaust air controls FDS 100 and FDS 200

Water detector SHT 5000

Item no.: 300744
119,00 
SHT 5000 - 230 V - the all-rounder among water detectors - now optimized for the WWD 200 smart home adapterwhich sends push notifications to your smartphone via the Smart Live app.
Areas of application
  • Water ingress / water pipe burst
  • Pump control
  • Cistern monitoring
  • Level monitoring
  • Overflow message (e.g. drainage shaft)
  • Monitoring flat roofs
  • Combined with mini float switch also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.)
  • Automatic bilge pumps (SHT5000-24 V for boats)
  • for water sports, hobby brewers, aquariums, model making, swimming pools, bathrooms and kitchens, workshops, etc.
  • IP 65 on request

CO detector 40 ppm

Item no.: 7639852
249,00 
Monitoring device for safety shutdown of the boiler in case of carbon monoxide leakage. Alarm threshold: 40 ppm / 1.0 seconds Be sure to check the nameplate on the back to find the right sensor for you! You can find the alternative sensor under article number: 7549937

Aquastop SHT 216

Item no.: 300260
89,00 
The Aquastop SHT 216 is a protection system with equipment shutdown. The electronic alarm and shutdown device detects the smallest amounts of liquid and

Dirt trap accessories for mini float switches

Item no.: 300320
35,89 
Dirt trap Protector stainless steel incl. V2A mounting bracket Application area
  • Outdoor mini float switch and sensors
  • Floodplain
  • Ponds
  • Rain cisterns
  • against high dirt input (leaves, branches, grass, etc.)
  • Protection against small animals (frogs, snails, mice, etc.)

GAS ALARM GX-D33

Item no.: 300257
179,50 
  • CO2 warning device for tea kitchens
  • according to DIN6653-2
The GX-D33 with internal sensor for carbon dioxide from pressurized CO2 bottles is plugged into one of the lower sockets located near the CO2 bottles to be monitored, is ready for operation after 3 minutes of preheating time and warns when 3.0%vol. CO2 is reached with a loud alarm sound and red flashing LED. It is the easiest to use CO2 detector for water bubblers with large CO2 bottles in small rooms.
DIN-EN 6653-2 with exceptions

CO GAS ALARM GX-C1pro

Item no.: 300783
109,00 
The socket carbon monoxide warning device with internal electrochemical CO sensor is plugged into a medium-sized socket, is ready for operation after 5 minutes initialisation time and warns of excessive CO concentrations strictly according to the specifications of DIN EN 50291 for carbon monoxide in living spaces with a loud alarm tone and red flashing LED. The sensor, the evaluation, the measuring cell with its calibration as well as the software developed by Elektrotechnik Schabus were subjected to a full test at TÜV Süd according to DIN EN 50291, safety and stability were certified for the system. Possible applications
  • Monitoring for carbon monoxide leakage at combustion sites in flats, houses, shops, small businesses, cafés, low-dust workshops
  • Monitoring of all gas-fired installations
  • For gas heaters, gas heating, gas cookers, gas ovens, but also oil heaters and open fires, can also be used in bathrooms and other damp rooms, as long as moisture does not condense.
  • Designed for years of continuous operation
 

Water sensor SHT 5009 for floor mounting

Item no.: 300720
44,99 
Accessories for water detector The water sensor SHT 5009 with three plate electrodes is suitable for floor mounting on soft floors such as parquet, laminate, but also carpets or linoleum floors. With its 2-wire cable it is directly ready for connection to the Schabus water detectors SHT 5000 and SHT 5001, as well as to the level controller SHT 5002 as overflow detector. The middle drill hole is reinforced with aluminum, so depending on the type of mounting desired, a thread can also be cut.

Water detector SHT 5001

Item no.: 400748
109,00 
The SHT 5001 water detector for top-hat rail mounting in the fuse box or small distribution board has 2 independent detection lines, which are designed identically with the option of connecting sensors or mini float switches to their own inputs in each case, activating the alarm memory via wire jumper or switching a potential-free changeover relay when "water" is detected. Test, reset, internal alarm beeper, or the connection of external alarm indicators with 12 volts to 30 mA, on the other hand, are carried out together for both detection lines. The cable lengths can be extended for sensors up to 100 meters, for mini-float switches up to 300 meters per signal line, provided that only thin and unshielded 2x0.14mm² LiYY cables are used, which are not laid parallel to lines of the mains AC voltage.

Folding float switch plastic

Item no.: 200949
19,90 
Hinged float switch made of plastic, normally open or normally closed function freely selectable by 180 ° rotation Possible applications
  • Tanks, cisterns
  • Pump sump
  • Water, fuel oil, vegetable oil, lubricating oils, etc.

Gas sensor GX-SE City / natural gas

Item no.: 200897-SE
95,00 
External city and natural gas sensor for the warning devices GX-A1+ or GX-HS, detects natural gas (methane) from leakages of the house installation or bottled gas (butane, propane) from leaking fittings.

Cable magnetic switch KMS 098K22

Item no.: 300743
19,90 
Additional magnetic switch for KDS 110/116/210 and KDT 210 The additional magnetic switch for a second (or more) window is equipped with 2 screw terminals and is mounted between the control unit and the original magnetic switch. The connection is made with a 2-wire LiYY control cable. The OR function is achieved, only one of the two windows must be open for an exhaust air control KDS / KDT to release the fan motor or an air conditioning control KKS to switch off the air conditioning.

RAL painting for exhaust controls

Item no.: 09.67940.0
35,00 
WEEE NO.: EN91394868

Active water sensor SHT 8800

Item no.: 200362
74,99 
for analogue inputs in smarthome, GLT, etc.

Water sensor SHT 5800 for edge and floor mounting

Item no.: 300758
37,00 
Accessories for water detector The SHT 5800 water sensor with two contacts, completely handcrafted and suitable as an accessory for all Schabus water detectors, has stainless steel contacts and a hole reinforced with aluminum for mounting and is ideal for detecting damp floors or creeping soil moisture in regularly dry environments.

SHT 228 pump control unit

Item no.: 300219
99,00 
The water detector for pump control! The SHT 228 socket water detector functions as a pump control. If a certain water level is detected with the mini float switch, the socket switches on the connected pump and in contrast to the SHT 227, the SHT 228 does not sound an alarm. After the water level drops below the specified level, the pump continues to run for an adjustable run-on time of 0 to 100 seconds and is then switched off. Possible applications
  • Water ingress
  • Pump sump
  • Cistern monitoring
  • Also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.)

Pump control SHT 217

Item no.: 300217
89,00 
The SHT 217 socket water detector functions as a pump control. If the sensor detects soil moisture, the socket switches on the connected pump and an alarm sounds. After the sensor has dried, the pump continues to run for an adjustable follow-up time of 0 to 100 seconds, is then switched off and the alarm stops again. Possible applications
  • Water ingress
  • Pump control
  • Cistern monitoring
  • Pump sump (dry)

Suspended float switch plastic

Item no.: 200950
59,00 
Suspended float switch with weight and PG gland for hanging on cable, for drums, sumps and tanks with horizontal lid  

FTW 519 Comfort package with FDS 200 set

Item no.: 300529
329,00 
This comfort package without DIBt approval includes a classic FDS 200 exhaust air control set consisting of a radio window switch with built-in receiver and an FTW exhaust gas temperature monitor with integrated transmitter for long, completely free (unjacketed) stovepipes at a minimum height of 80 cm (measured from the top edge of the stove). This means that for very rarely used furnaces, a window does not always have to be opened as well every time the exhaust air system is used.
Hint: Involve your chimney sweep in your planning before ordering so that nothing stands in the way of acceptance afterwards. There are significant regional differences over which Elektrotechnik Schabus has no influence.

Radio exhaust air control FDS 200 DIBt

Item no.: 300462
149,95 
Possible applications
  • Fume cupboard control
  • Exhaust air control
  • Simple receiver installation in seconds
  • for trough fans is only the FDS 100 or KDS 110 suitable!
  The transmitter of the FDS 200 set with DIBt approval monitors the window position and transmits the information by radio to an intermediate plug receiver with a switched 5 A socket. In this way, an exhaust air system can only be operated with a tilted or open window if it is ensured that sufficient fresh air flows into the room and thus no negative pressure is created that could draw dangerous and toxic carbon monoxide from a combustion site.

GAS ALARM GX-A1+

Item no.: 300892
269,00 
The universal gas warning device for surface-mounted fixed installation is suitable for different gases depending on the sensor. It provides the operating voltage required for the sensor, regulates the heating current required for some sensors and evaluates the sensor voltage returned by the sensor and displays it on its illuminated plain text display. Based on the different voltages, the GX-A1+ recognizes five different states, including the pre-alarm from 2.0 volts and the main alarm from 2.5 volts, at which not only the potential-free changeover relay assigned to the alarm switches, but the entire warning device makes itself clearly audiovisually noticeable with a loud alarm tone and flashing display lighting. There are sensors for city and natural gas, refrigerant (HFC) and carbon dioxide in two measuring ranges; for carbon monoxide a separate set GX-A1+CO is available, as the TÜV-tested CO sensors are addressed and evaluated differently. Possible applications
  • Detection of town, natural and liquid gases
  • Methane, butane, propane, ethanol
  • Gastronomy, CO2 bottles, dispensing systems
  • Dry ice processing and storage
  • Detection of refrigerants such as R-32, R-404a, R-410a, etc.

GX-K2 Gas alarm with external sensor

Item no.: 300932
139,00 
The warning device warns of the toxic vapors that could escape from leaking refrigeration and cooling systems and primarily serves to protect people who should not inhale these vapors. The HFC ALARM GX-K1 with internal sensor or GX-K2 with external sensor already warns at concentrations far below a life-threatening level. This monitoring system is therefore set very sensitive according to its purpose. The GX-K1 or GX-K2 is plugged into the sockets, with the GX-K2 the sensor is positioned appropriately and then the HFC warning device is ready for operation after 3 minutes preheating time and warns early in case of leakage at the cooling system with a loud alarm tone and red flashing LED. The device is suitable for normal household use and must not be used in potentially explosive atmospheres.
The warning device is ready for operation after 3 minutes of preheating time and gives early warning of leaks in the cooling system with a loud alarm tone and red flashing LED.
Possible applications
  • Heat pumps
  • Air conditioners
  • Coolant and refrigerant
  • Hydrofluorocarbon
   

Water sensor SHT 5600 with 3 contacts

Item no.: 300753
35,01 
Accessories for water detectors
The SHT 5600 water sensor is identical in construction to the SHT 5006 standard water sensor, except that with the SHT 5600 an additional third contact has been inserted in the gap between the two ground contacts. This makes it possible, in conjunction with the SHT 5001 water detector, to distinguish between the messages "soil moisture" and "water rising further" and to take different measures, since with the SHT 5001 a separate relay is switched for each of the two states.

Exhaust gas temperature monitor ATW 519 40°C

Item no.: 201749
129,00 
The Cetrotec exhaust gas temperature monitor type 519 with 40°C switching point is type-tested by TÜV, approved for use in heat generating plants and is mounted with a flange on a free piece of stove pipe with a minimum diameter of 120 mm. Its normally closed contact can switch power, its normally open contact is only intended for control tasks, so it is technically suitable for bridging an exhaust air control when the furnace is cold or is used slightly modified as a control device for our cable exhaust air controls. Possible applications
  • Bivalent operation with gas or oil heating to lock it when the solid fuel boiler is in operation
  • Monitoring tasks to switch off the exhaust air system in rooms with open or closed fireplaces to prevent exhaust gases from being sucked back into the rooms when the fireplace is burning.
  • Other monitoring and control tasks such as controlling the storage tank charging pump
  • Indicator lamp for fuel boiler burnout
Hint: Involve your chimney sweep in your planning before ordering so that nothing stands in the way of acceptance afterwards. There are significant regional differences over which Elektrotechnik Schabus has no influence.

Cable exhaust control KDS 116

Item no.: 300750
79,00 
Cable exhaust control with built-in unit! The magnetic switch of the KDS 116 without DIBt approval monitors the window position and transmits the information via a thin cable to a built-in control unit with potential-free 16 A changeover relay. For example, an exhaust air laundry dryer can only be operated with the window tilted or open if it is ensured that sufficient fresh air flows into the room and thus no negative pressure is created that could draw dangerous and toxic carbon monoxide from a combustion site. Possible applications
  • Fume cupboard control
  • Bathroom fan control
  • Exhaust air clothes dryer
 

Cable exhaust control with thermal switch KDT 210

Item no.: 300674
249,00 
This package without DIBt approval includes a classic cable exhaust air control set KDS 210 consisting of a window solenoid switch with intermediate plug control unit and an exhaust gas temperature monitor ATW 519 with integrated cable breakage protection for a free piece of stove pipe that is accessible at any time, with all components already pre-assembled. Due to the additional temperature switch, the exhaust air system can be operated independently of the window position as long as the furnace is cold; opening the window is only necessary when the furnace is in operation. Hint: Involve your chimney sweep in your planning before installation so that nothing stands in the way of acceptance afterwards. There are significant regional differences over which Elektrotechnik Schabus has no influence.  

Possible applications

  • Fume cupboard control
  • Exhaust air control

Water detector SHT 241

Item no.: 300241
99,00 
The water detector for simple and quick installation! The SHT 241 socket water detector functions as a purely acoustic detector. If a certain water level is detected with the mini float switch, a loud acoustic alarm sounds and the LED flashes red. After the water drops below the specified level, the device automatically goes silent and the LED turns green again. Possible applications / special features:
  • Same unit as SHT 240, but with float switch
  • Particularly suitable for dirty water or other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oil, etc.)

Aquastop SHT 226

Item no.: 300228
105,01 
The Aquastop SHT 226 is a protection system with device shutdown. The electronic alarm and shutdown device detects the smallest amounts of liquid and switches off the connected device. Possible applications
  • Detection of water level changes (at least 4 cm)
  • also for other liquids (e.g. fuel oil, diesel, vegetable oil, lubricating oil, etc.)

WWD 200 Smart Home Adapter

Item no.: 200200
89,00 
The WWD 200 smart home adapter is a device for connection to our SHT 5000, SHT 5001 or SHT 5002 water detectors.

CO ALARM GX-C3pro

Item no.: 300229
179,00 
The socket CO warning device with external sensor for carbon monoxide is plugged into a socket and the sensor is placed at average nose level. The warning device is ready for operation after 5 minutes and warns with the alarm thresholds specified in DIN standard 50291 with an alarm tone and a red flashing LED. In the event of an alarm, the device connected to the GX-C3pro, e.g. a gas heater, is also reliably switched off, whereby the device remains switched off until the user has ensured that his ventilation measures have had an effect and he resets the device by briefly unplugging it and plugging it back into the socket. Possible applications
  • Monitoring in case of leakage of carbon monoxide from all heat generating equipment in apartments, houses, stores, ...
  • Monitoring of all gas-operated systems and safety shutdown in the event of elevated CO levels
  • for gas heaters, gas heating, gas cookers, gas furnaces, oil heating and any combustion facility with supply
  • Can also be used in the bathroom and other damp rooms as long as moisture does not condense
  • Designed for years of continuous operation

Cable exhaust control KDS 210 DIBt

Item no.: 300672
119,90 
The magnetic switch of the KDS 210 set with DIBt approval monitors the window position and transmits the information via a thin cable to an intermediate plug control unit with a switched 5 A socket. In this way, an exhaust air system can only be operated with a tilted or open window if it is ensured that sufficient fresh air flows into the room and thus no negative pressure is created that could draw dangerous and toxic carbon monoxide from a combustion site. Possible applications
  • Fume cupboard control
  • Exhaust air control
  • for trough fans is only KDS 110 suitable

Radio climate control FKS 100

Item no.: 301268
159,00 
Do not cool and heat out the window! The transmitter of the FKS 100 set monitors the window position and transmits the information by radio to a built-in receiver with potential-free 5 A changeover relay. In this way, an air conditioner can be switched off automatically when the window is tilted or open, so that the outside air is not cooled and energy is wasted unnecessarily.

Active water sensor SHT 8815 for ext. control units

Item no.: 200370
69,00 
Accessories for PLC, smarthome, ... Digital inputs with int. pull-up/pull-down resistor

Comfort package FDS 200 / FTX 519

Item no.: 300549
329,00 
This comfort package without DIBt approval includes a classic FDS 200 extract air control set consisting of a radio window switch with intermediate plug receiver and an FTX flue gas temperature monitor with remote transmitter for shorter or covered but always freely accessible stovepipes. This means that for very rarely used stoves, a window does not always have to be opened every time the exhaust air system is used.

GAS ALARM GX-CO-12

Item no.: 300712
129,00 
Areas of application
  • mobile use in camping vehicles and on ships
  • Camper, caravan
  • other recreational vehicles with gas cooking and cooling facilities
  • boiler room with gas heating or boiler
The CO detector, which has been fully tested by TÜV Süd according to DIN EN 50291, can be used both as a mobile device in your recreational vehicle (e.g. camper van) and as a stationary device at home. For mobile use, a cable for connection to the 12V or 24V battery is included, for operation at home, you will receive a plug-in power supply unit with matching RJ plug, so that alternating operation is also possible and the GX-CO-12 always ensures your safety: at home and on the road.   For installation in gas boilers from Viessmann we recommend the articles 7639852 or 7549937. Be sure to check the nameplate on the back to find the sensor that is right for you.

Starting current limiter ASB 116 2500W/10A

Item no.: 300116
149,00 
The ASB 116 starting current limiter limits the machine connection power of an AC electric motor or power tool starting in no-load operation for around 700 milliseconds immediately after switching on, thus preventing the fuses from blowing.

Cable glands SET Accessories SHT 5000

Item no.: 300945
9,90 
Strain reliefs for the connection lines of the water detector SHT 5000 And SHT 5002

PROFI CO ALARM GX-C300

Item no.: 300255
299,00 
Professional carbon monoxide warning device for fixed installation with warning levels and alarm delay times as specified in the DIN EN 50291 standard. Display of the exact measured CO concentrations in ppm on an illuminated plain text display. In case of alarm and in case of technical faults detected by the device itself, one potential-free change-over relay each switches to activate e.g. forced ventilation or to inform the BMS. The internal electrochemical sensor has a service life of 6 to 10 years, depending on the ambient conditions, and can easily be replaced by Elektrotechnik Schabus at the factory.

Water detector SHT 5002

Item no.: 300749
109,00 
The SHT 5002 water detector for top-hat rail mounting in the fuse box or small distribution board is designed as a level controller and has 2 different detection lines. Detection line 1 is the actual level controller, which receives the functions "Fill" or "Drain" by means of a wire jumper and switches its potential-free 5 A changeover relay depending on a lower and an upper level, each of which is defined by a mini float switch. Detection line 2 works like a simple water detector and is called "overflow detector" here, i.e. as soon as water is detected by a sensor or mini-float switch, the second relay of the SHT 5002 switches over.

Water detector SHT 240

Item no.: 300240
89,00 
The SHT 240 socket water detector functions as a purely acoustic detector. If the sensor detects soil moisture, a loud acoustic alarm sounds and the LED flashes red. After the sensor has dried, the device automatically goes silent and the LED lights up green again.

CO2 traffic light "Medical

Item no.: 400350
306,73 
The CO2 traffic light "medical" with wall mount and plug-in power supply is our most sensitive version, which already switches to yellow at 800 ppm CO2, from 1200 ppm CO2 to red and from 2000 ppm CO2 to red flashing with alarm tone. It is therefore ideally suited for monitoring rooms in which many people with special physiological restrictions are often present, e.g. waiting rooms in doctors' surgeries or senior residences.   Possible applications
  • Surveillance of doctors' surgeries, hospitals, old people's homes, etc.
  • for all rooms where people spend long periods of time on a regular basis
  • Reliable reminder for regular draught ventilation

GAS ALARM GX-D2

Item no.: 300252
139,00 
The plug-in CO2 warning device with external sensor for carbon dioxide is simply plugged into a socket and the sensor is placed in an upper (more tolerant) or lower (more sensitive) position depending on the desired sensitivity. It is ready for operation after 3 minutes of preheating time and warns when half the MAC (2500 ppm) is reached with a loud alarm tone and red flashing LED.

Aqua Scanner SHT 5020

Item no.: 300746
109,00 
The Aqua Scanner SHT 5020 is a 2 meter long sensor (extendable on request), sensitive to single drops of water along its entire length. The mechanically strong cable, resistant to corrosion and abrasion, consists of two sensor wires embedded in a fluoropolymer carrier rod. Due to the robust cable construction with conductive polymer technology and fluoropolymer construction detection, no metal is exposed. For cleaning, you can wipe it with a clean damp cloth. For connection to the Schabus water detectors is suitable only a LiYY control line with 2x 0.14mm², which can be ordered separately.

Possible applications

  • Accessories for SCHABUS water detectors SHT 5000, 5001 and 5002
  • 100% made in Germany
  • for laying under kitchen and bathroom furniture
  • under aquariums
  • under other devices, where water can leak over a wide area
  • under pipes, tubs, tanks ...
  • for indoor projects such as data centers / control rooms / HVAC / IOT
 

GX-CO2-30 Carbon dioxide gas sensor

Item no.: 300315
239,00 
Ext. CO2 sensor for carbon dioxide - from technical equipment The external CO2 sensor with its own alarm transmitter, status LEDs and test button is optimized as an accessory for the SCHABUS gas warning devices GX-HS and GX-A1+ is oriented with its warning levels and protection class IP54 to the beverage dispensing system regulation. DIN-EN 6653-2 with exceptions

Radio receiver FGS 170-E

Item no.: 300701
85,00 
Additional receiver for the FGS 170 exhaust air controls  

Small horn warning light

Item no.: 200994
129,00 
Small horn with funnel and LED warning light flashing for our warning systems!  

GX-D11

Item no.: 400311
139,00 
The plug-in CO2 traffic light with internal NDIR sensor, the LED displays red, yellow and green, as well as discreet acoustic support, is used in areas where a reminder for regular ventilation is necessary, but people present should not be unsettled by yellow and red warning colours that are visible from afar.

Pump control SHT 227

Item no.: 300227
99,00 
The water detector for pump control! The SHT 227 socket water detector functions as a pump control. If a certain water level is detected with the mini float switch, the socket switches on the connected pump and an alarm sounds. After the water level drops below the specified level, the pump continues to run for an adjustable follow-up time of 0 to 100 seconds, is then switched off and the alarm stops again. Possible applications
  • Water ingress
  • Pump sump
  • Cistern monitoring
  • Also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.)

Gas sensor GX-CO

Item no.: 200898-CO
95,00 
External carbon monoxide and smoke sensor for GX-A1+ or GX-HS warning devices, detects all undesirable gases and smoke in the living room air originating from combustion.

Radio climate control FKS 200

Item no.: 301462
168,98 
The transmitter of the FKS 200 set monitors the window position and transmits the information by radio to an adapter plug receiver with a switched 5 A socket. In this way, an air conditioner can be switched off automatically when a window is tilted or open, so that the outside air is not cooled and energy is wasted unnecessarily.  

GAS ALARM GX-B1pro

Item no.: 300924
109,00 
The socket gas warning device with internal sensor for town gas and natural gas is plugged into an upper (natural gas / methane) or lower (liquid gas / butane, propane) socket depending on the gas, is ready for operation after 3 minutes preheating time and warns already far below dangerous gas concentrations with a loud alarm tone and red flashing LED. Possible applications
  • Monitoring of gas heating or gas cooker / detection of town, natural and liquid gases
  • Monitoring of the heating and utility rooms
  • Storage of liquid gas cylinders or camping gas
  • Air conditioners / coolants

PROF. CO ALARM GX-C300P

Item no.: 300256
399,00 
Professional carbon monoxide warning device for permanent installation with warning levels and alarm delay times as specified in the DIN EN 50291 standard and suction device by means of a silicone hose to monitor thermally demanding rooms (e.g. gas-operated sauna). Display of the exact measured CO concentrations in ppm on an illuminated plain text display. In the event of an alarm and technical faults detected by the unit itself, a potential-free changeover relay switches in each case, e.g. to activate forced ventilation or to inform the BMS. The internal electrochemical sensor has a service life of 6 to 10 years, depending on the ambient conditions, and can easily be replaced by Elektrotechnik Schabus at the factory.

Gas sensor GX-CFC for refrigerant

Item no.: 200901
119,00 
External refrigerant sensor for GX-A1+ or GX-HS warning devices, detects fluorinated hydrocarbons (HFC: R-22, R-32, R-410a, R-1234yf, ...) from leaking fittings of refrigeration, air conditioning and heat pump systems.

[vc_row][vc_column][vc_text_separator title=”Lieferprogramm Elektrotechnik SCHABUS” align=”align_left” color=”custom” accent_color=”#c20012″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Elektrotechnik Schabus ist Entwickler und Hersteller der hochwertigen Warnsysteme und sicherheitstechnischen (Funk-) Lösungen. Diese Lösungen entwickeln wir durch unsere Nähe am Markt Geschehen und am Kunden. Nur so wissen wir, was die Endverbraucher suchen und brauchen. Zusätzlich entwickeln wir elektronische und elektromechanische Spezialanfertigungen für Unternehmen unterschiedlichster Branchen. Mit Elektrotechnik Schabus haben Sie einen erfahrenen Partner zur Seite, der Sie von der Entwicklung bis hin zur Fertigung und Montage bei Ihrem Projekt kompetent begleitet. Sie haben die Idee – wir setzen die Lösung um![/vc_column_text][/vc_column][/vc_row]