Accessories for water detectors
SCHABUS flip float switches are built and tested individually by hand, they are reliable, maintenance and wear free and and by side mounting with sealing collar. Normally open or normally closed function is freely selectable by 180 ° rotation.
The 2.5 meter long connection cable is soldered by SCHABUS with a Meder reed contact and potted with Wepuran®. The narrower of the nuts is firmly connected to the thread and is only used for countering during fastening.
The switching contact closes from the level specified by mounting, the switching capacity is max 10 watts (limit data 25 V AC / 60 V DC / 500 mA). With voltages up to 5 volts and currents up to 1 mA, up to 1 trillion switching operations are possible.
Float switches are basically used where a water level is reported, i.e. in tanks, cisterns, wells, in the pump sump and in all other fluid reservoirs. Special lengths of the cable can be manufactured by us in the length you need.
LIYY cables are only temporarily waterproof and, according to the manufacturer, flame-retardant, low-adhesion, self-extinguishing and largely resistant to oils, greases, coolants and lubricants.
- Accessories for water detectors SHT 5000, 5001and 5002
- Plastic material (polypropylene)
- Reed contact encapsulated in Wepuran®
- Installation method laterally from the inside in tanks
- Normally closed (NC) / normally open (NO) by 180° rotation
- LIYY cable 2.5 m (special lengths on request)
- suitable for all liquids with a density of at least 0.7 g/cm³.
e.g. water, heating oil, diesel, vegetable oil, lubricating oils, etc. - PG 9 thread
When using external power supply units, it is necessary to connect a freewheeling diode (e.g. 1N4148) in parallel with the relay or contactor.
The function of the freewheeling diode is to suppress voltage peaks that occur when the relay is switched off. This minimizes the current flow and voltage, which protects the sensitive reed contacts.
Reviews
There are no reviews yet