Accessories for water detectors
Performance features
- Plastic material (polypropylene, POM and ABS)
- Cable length 6 m
- Normally closed (NC) / normally open (NO) - By turning the float body around
the reverse contact function is obtained - suitable for all liquids with a density of at least 0.7 g/cm³.
e.g. water, heating oil, diesel, vegetable oil, lubricating oils, etc.
The plastic suspended float switch is reliable, maintenance- and wear-free and easy to install. The switching contact closes from approx. 4 cm level height and activates the input of the water detector. By turning the float body around, the reverse switching function is also obtained.
The suspended float switch has an attached weight so that the float switch always hangs vertically in flow-free media. The cable is held securely by a PG gland, can be positioned steplessly and can thus be suspended from above in sumps, tanks or barrels. No further assembly work, e.g. with angles and rods, is required.
The suspended float switch has an attached weight so that the float switch always hangs vertically in flow-free media. The cable is held securely by a PG gland, can be positioned steplessly and can thus be suspended from above in sumps, tanks or barrels. No further assembly work, e.g. with angles and rods, is required.
LIYY cables are only temporarily waterproof and, according to the manufacturer, flame-retardant, low-adhesion, self-extinguishing and largely resistant to oils, greases, coolants and lubricants.
Circuit diagram with freewheeling diode
When using external power supply units, it is necessary to connect a freewheeling diode (e.g. 1N4148) in parallel with the relay or contactor.
The function of the freewheeling diode is to suppress voltage peaks that occur when the relay is switched off. This minimizes the current flow and voltage, which protects the sensitive reed contacts.
WEEE NO.: EN91394868
1 rating for Suspended float switch plastic