Functional description:
By using the KDS 210 cable exhaust air control unit, an exhaust air system can only be used when the window is open and the necessary supply air can flow into the room. A cable solenoid switch on the window sash monitors whether the window is open or closed and transmits this information to the control unit via a thin cable. This is simply plugged between the socket and the mains plug of the extractor hood and only releases the power supply when the window is tilted or open. The mains plug fuse prevents accidental reconnection of the appliance plug of the cooker hood.
Second window:
The system can be combined with another cable solenoid switch KMS 098K22 (Art. No. 300743) for a second window. At least one window must be open for the exhaust air system to be switched on.
Existing window contact: If a magnetic contact has already been installed by the window manufacturer and if it is a normally open contact (normally open contact is closed when the window is closed), this can be used for the KDS 210. Only the enclosed 10 kOhm resistor must be connected in parallel to the NO contact to ensure cable breakage protection.
Line is too short?
Please call us, we can produce special lengths with 2-wire cable for you. Can not be ordered via wholesale!
Performance features
- TÜV tested with DIBt approval Z-85.2-14
- Cable breakage protection
- Terminal connection to cable solenoid switch
- Relay contact 5A
- Mains plug fuse
- 4 spacer plates for magnet (height adjustment window)
- Can be combined with second magnetic switch
- Simple installation
Scope of delivery
- Control unit with cable 4 m
- Cable magnetic switch
- 4x spacer plates for magnet
- Mounting material
- Detailed operating and assembly instructions
Color telegrey, housing of the transmitter also available in standard brown, as well as on request in various RAL colors at extra charge! Technical data
| Operating voltage | 230 V AC / 50 Hz |
| Switching capacity (max.): | 1150 VA (700 W) / 5 A (3 A) |
| Power consumption approx: | 1,5 Watt |
| Control voltage: | 18 V |
| Control line: | 4 m / 2 x 0.14 mm² (special l. on request) |
| Functional area: | - 15 °C / + 40 °C |
| Protection class: | IP 40 |
| Control unit (HxWxD): | 121x 57 x 46 mm |
| Magnetic switch (HxWxD): | 55 x 15 x 18 mm |
| Magnet (HxWxD): | 55 x 15 x 18 mm |
| Spacer plate (HxWxD): | 55 x 15 x 5 mm |
WEEE NO.: EN91394868
Reviews
There are no reviews yet