• GD-04K GSM dialer and control unit
  • GD-04K GSM dialer and control unit

GD-04K GSM dialer and control unit

GD-04K GSM dialer and control unit

419,33 €
419,33 €
Sale Sold out
Taxes included. Versandkosten
  • triggers calls to up to 100 stored phone numbers in the event of an alarm
  • sends SMS messages using an optional SIM card (not included)
  • 4 alarm inputs - input terminals with time filter from 0.5 - 10 hours
  • 2 relay outputs (230 V/2.5 A) - power terminals for device control
  • Relay outputs can be switched on at predefined intervals of 1 second to 10 hours (pulse) or permanently
  • 2 LED indicators (red/green)
  • Power supply via included power adapter (12V DC / 1.5A)
  • Mini USB port for connection to a PC
  • optionalEmergency power supply (Article 200579)- for standby time 12-24h
  • PC interface optional
  • Discounts for specialist companies & resellers
  • Personal expert advice (no call center!)
  • Repair service beyond the statutory warranty

SKU: 200279

Delivery time: 2-3 working days

View full details
GD-04K GSM dialer and control unit

GD-04K GSM dialer and control unit

419,33 €
  • Description
  • Technical information
  • Downloads
  • Reviews
Scope of delivery
  • GSM dialing and control device
  • short stub antenna via SMA socket
  • 230 V AC power supply 12 V
  • Operating instructions, software via download
The GD-04K is a versatile GSM dialer and control device . It can be used to remotely control various devices and generate and query the corresponding status reports.
Control can be via SMS command or dial-in. The module is equipped with two current outputs with status or pulse response. For status monitoring, the GD-04K module has four input terminals that respond to ground (connected to the GND terminal). The activation/deactivation of an input terminal can be reported to up to 100 authorized phone numbers via SMS, dial-in, or a combination of these two options.
Additionally, 2 relay outputs can be controlled via SMS or call to control devices - e.g. to reset the SCHABUS water detector SHT 5000 .
The GD-04 can be programmed via SMS commands, the included software, or a free internet portal.
A SIM card with deactivated PIN code query is required for operation (not included).
The GD-04K can be supplemented with a GD-04A backup battery, which ensures the module's power supply when the module is disconnected from the mains. The module can be powered using the USB cable or remotely via a PC with GD-Link 2.1.0 software installed (or newer version) can be configured.
Configuration is also possible via a programming SMS. A detailed table with the programming commands is included in the operating instructions.
WEEE NO.: DE91394868
Operating voltage 10.5-15V DC | 25-59mA
Functional area -10°C / +40°C
radio frequency Frequency band E-GSM 850/900/1800/1900 MHz
Power consumption approx. 25 mA (+17 mA per relay), max. 200 mA (during communication)
brand Jablotron
DIN standard EMC EN 301489-7, EN 55022, EN 61000-6-3, safety EN 60950-1
capacity 230 mAh
Transmitting power (ERP) RF output power 2Watt for GSM 850/900

Operating instructions

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Description
Scope of delivery
  • GSM dialing and control device
  • short stub antenna via SMA socket
  • 230 V AC power supply 12 V
  • Operating instructions, software via download
The GD-04K is a versatile GSM dialer and control device . It can be used to remotely control various devices and generate and query the corresponding status reports.
Control can be via SMS command or dial-in. The module is equipped with two current outputs with status or pulse response. For status monitoring, the GD-04K module has four input terminals that respond to ground (connected to the GND terminal). The activation/deactivation of an input terminal can be reported to up to 100 authorized phone numbers via SMS, dial-in, or a combination of these two options.
Additionally, 2 relay outputs can be controlled via SMS or call to control devices - e.g. to reset the SCHABUS water detector SHT 5000 .
The GD-04 can be programmed via SMS commands, the included software, or a free internet portal.
A SIM card with deactivated PIN code query is required for operation (not included).
The GD-04K can be supplemented with a GD-04A backup battery, which ensures the module's power supply when the module is disconnected from the mains. The module can be powered using the USB cable or remotely via a PC with GD-Link 2.1.0 software installed (or newer version) can be configured.
Configuration is also possible via a programming SMS. A detailed table with the programming commands is included in the operating instructions.
WEEE NO.: DE91394868
Technical information
Operating voltage 10.5-15V DC | 25-59mA
Functional area -10°C / +40°C
radio frequency Frequency band E-GSM 850/900/1800/1900 MHz
Power consumption approx. 25 mA (+17 mA per relay), max. 200 mA (during communication)
brand Jablotron
DIN standard EMC EN 301489-7, EN 55022, EN 61000-6-3, safety EN 60950-1
capacity 230 mAh
Transmitting power (ERP) RF output power 2Watt for GSM 850/900
Downloads

Operating instructions

Connection examples
FAQ - Frequently Asked Questions
Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)