Couldn't load pickup availability
SKU: 200324
Delivery time: 2-3 working days
View full detailsFor 2-wire power interfaces with precise wet/dry detection
The SHT 8824 is a compact, active water sensor with two V4A stainless steel contacts and a potted housing made of Wepuran® plastic .
It works as a constant current sink :
Dry operation: approx. 4 mA
Wet operation: approx. 20 mA
➡️ This current change allows a clear distinction between “dry” and “wet” – ideal for controllers with a 2-wire interface.
The sensor is extremely sensitive:
✅ Even simple distilled water according to VDE 0510-5 (e.g. from the hardware store) is reliably detected.
The technology only reaches its limits when it comes to completely ion-free ultrapure water.
Home automation with analog power input
PLC or BMS with 2-wire sensor inputs
Applications with increased recognition requirements
Only suitable for dry environments – permanent humidity can cause corrosion through electrolysis
Two V4A stainless steel contacts
Wepuran®-encapsulated plastic housing
LIYY cable : temporarily waterproof, flame-retardant, self-extinguishing, resistant to oils and greases
Mounting hole for fixed floor mounting available
The SHT 8800 is not suitable for direct connection to Schabus water detectors . Please note this during integration.
WEEE NO.: DE91394868
Operating voltage | 10…30 VDC, typ. 24 VDC, SELV/PELV |
---|---|
Functional area | -15°C / +50°C |
Protection class | IP 68, protection against water jets for 30 minutes, cable temporarily waterproof |
Dimensions (W x W x D) | 34x12x10 mm |
Load resistance / burden | up to 500 Ω at Ub < 24 VDC, up to 700 Ω at Ub >= 24 VDC |
Line | 2-wire – LIYY – 2x 0.14mm² – unshielded – Ø 3.5mm – white – 4 meters long, pinout: white – negative connection / 0 V / minus; brown – positive connection / Ub / plus |
material | ABS, aluminum, V4A stainless steel contacts, Wepuran® plastic, hand-cast |
For 2-wire power interfaces with precise wet/dry detection
The SHT 8824 is a compact, active water sensor with two V4A stainless steel contacts and a potted housing made of Wepuran® plastic .
It works as a constant current sink :
Dry operation: approx. 4 mA
Wet operation: approx. 20 mA
➡️ This current change allows a clear distinction between “dry” and “wet” – ideal for controllers with a 2-wire interface.
The sensor is extremely sensitive:
✅ Even simple distilled water according to VDE 0510-5 (e.g. from the hardware store) is reliably detected.
The technology only reaches its limits when it comes to completely ion-free ultrapure water.
Home automation with analog power input
PLC or BMS with 2-wire sensor inputs
Applications with increased recognition requirements
Only suitable for dry environments – permanent humidity can cause corrosion through electrolysis
Two V4A stainless steel contacts
Wepuran®-encapsulated plastic housing
LIYY cable : temporarily waterproof, flame-retardant, self-extinguishing, resistant to oils and greases
Mounting hole for fixed floor mounting available
The SHT 8800 is not suitable for direct connection to Schabus water detectors . Please note this during integration.
WEEE NO.: DE91394868
Operating voltage | 10…30 VDC, typ. 24 VDC, SELV/PELV |
---|---|
Functional area | -15°C / +50°C |
Protection class | IP 68, protection against water jets for 30 minutes, cable temporarily waterproof |
Dimensions (W x W x D) | 34x12x10 mm |
Load resistance / burden | up to 500 Ω at Ub < 24 VDC, up to 700 Ω at Ub >= 24 VDC |
Line | 2-wire – LIYY – 2x 0.14mm² – unshielded – Ø 3.5mm – white – 4 meters long, pinout: white – negative connection / 0 V / minus; brown – positive connection / Ub / plus |
material | ABS, aluminum, V4A stainless steel contacts, Wepuran® plastic, hand-cast |