Komfort-Paket FDS 100 & FTX 519 – Abluftsteuerung mit Abgaswächter

Scope of delivery

• FTX temperature monitor, tested according to DIN EN 14597 with FTX transmitter, 2 m heat-resistant silicone cable
• Mounting flange with adjusting screw and 2 self-tapping screws
• CR2 3V Longlife battery in the FTX transmitter

• Radio exhaust air control built-in receiver FDS 100 , radio magnetic switch (transmitter and magnet)
• 4 spacer plates for magnet/transmitter (for height adjustment when mounting on the window or window frame)
• Battery CR2032
• Mounting material
• Operating instructions

Housing of the FTX transmitter and window magnetic switch in telegrey-4 color, available on request in all RAL colors for an additional charge. Include your chimney sweep in your planning before installation to ensure that nothing stands in the way of inspection afterward. There are significant regional differences, over which Elektrotechnik Schabus has no influence. The DIBt certification does not apply to the set, but refers to the included wireless exhaust air control.

🔍 How it works

The FTX sensor monitors the flue gas temperature in the flue pipe and detects whether the stove is in operation. If the defined temperature limit of 40°C is exceeded, the system blocks the exhaust air release – the chimney takes priority. If the temperature drops by approximately 15°C, the release signal is sent again.

The integrated window transmitter allows the exhaust air system to operate only when the window is open— unless the furnace is cold , in which case it is automatically enabled. This dual logic (temperature + window contact) significantly increases safety and ease of use.

The components are already programmed at the factory – unpack, assemble, done!

📋 Technical information

• FTX sensor for smoke pipes from Ø 120 mm

• Permissible ambient temperature sensor max. 180 °C

• Transmitter installation outside the heat area (max. 50 °C)

• Radio range: approx. 20 m in open field

• Operation only suitable for single ovens

A notice:
The included FDS 100 wireless exhaust air control is DIBt-certified —this does not apply to the entire set. Please coordinate the planned installation with your local chimney sweep well in advance. Regional requirements may vary.

⚠️ Operating instructions

The FTX wireless temperature transmitter may only be operated with a single oven .

Use on several fireplaces at the same time is not technically permitted , as safe operation cannot be guaranteed.

👉 In this case, please contact Elektrotechnik Schabus’ technical support team – we will find an individual solution for your situation.

➕ Additional transmitter for second window

Would you like to be able to choose between two windows ? No problem:
With a second window contact transmitter FDS 098 (programmed to the same code at the factory), an OR function can be implemented – an open window is sufficient to release the exhaust air system.

---

🔁 Second recipient

Do you need two separately switchable outputs ?
An additional receiver (installation: FDS 199 , intermediate plug: FDS 299 ) can be added to the existing set.
As soon as the oven is cold or a window is opened , both receivers release their connected devices.

👉 When ordering additional devices, please always state the serial number of your existing receiver .

WEEE NO.: DE91394868